All the best information about Yamaha Digital Keyboards

Piano Learning System

Guides to remove and install Dell D510 Laptop Keyboard

Would you like to install a new keyboard in your Dell D510 laptop? It’s relatively easy even for inexperienced users. In my guide I’ll be replacing a damaged Dell D510 Laptop Keyboard(http://www.everbatt.com/dell-d510-laptop-keyboard-p-1244.html)  with a new one I got here for less than $20 from everbatt.com. Before you start do not forget to turn off the laptop and remove the battery.Remove one screw securing the keyboard. This screw is located between the lock/unlock and release latches.Insert a small flat head screwdriver between the keyboard and base. Carefully lift up the keyboard as it shown on the picture below.Move the keyboard and place it on the display panel so you can access components underneath.Carefully lift up the keyboard from the base and move it up so you can access the keyboard cable.Before you remove the keyboard, you’ll have to unlock the cable connector on the motherboard and release the cable. Be very careful. The keyboard connector is permanently attached to the motherboard. If you accidentally damage the connector, you’ll have to replace the whole motherboard. The connector opens up like a door. You can open the connector with your fingernail.Unlock the connector and release the keyboard cable.Now you can remove the keyboard and replace it with a new one if needed.Steps to install a new dell d510 keyboard is much easyier since you know how to remove one. But here I will show you some basic guide.Take the new dell keyboard and attach the keyboard cable to the connector, and push the connector down. Slide the new keyboard in. Replace the keyboard shield.Flip the HP laptop back over. Replace the set of five black plastic screws, and then the three silver screws. Replace the RAM cover.After intall it well, please check it and you may meet the following situations.1. If your keyboard is not responding, check to see that the connector is securely plugged into the correct port in the computer and your computer is plugged in and turned on. Also, check to see if there are any breaks or sharp twists in the keyboard cable.2. If your keyboard is not responding correctly, check to see that the correct keyboard driver is installed in your system.

Comments are closed.